Prosonic DVR Technical Information PDF herunterladen (Seite 42)

Digital Video Recorder

Decoder protocol: select type of decoder protocol. The following decoder protocols are preset in the

program, including “PANNSONIC”,“LLW”, “PELCO-D”, “PELCO-P”, “LILIN”, “NEON”, “PELCO-D YA”,

“PELCO-D SFD”, “PELCO-P MK”, “PELCO-D ZT”, “PELCO-P ZT”, “ZHIMIN”. Note: different protocols

can be used for different channels.

Address ID: Input the address of the decoder connected to the selected screen. The address ID must be

insistent with the address of the front-end decoder, or it will lead to failure of control. The address ID is set by

user.

Step length: Control the speed parameters when moving the PTZ. The bigger the step length is, the higher

the speed will be.

Preset points settings: This parameter is for setting of speed dome camera. The location of the camera,

the focus, aperture and zoom should be preset and memorized, and a number should be used to mark the setting.

 Preset point number: input a number from 00 to 225.

 Adjust location: press the “Adjust” button to enter control status and adjust the location of the dome by

direction buttons. Press Menu button to return.

 Save: to save current setting to the preset point number. Set your required preset points one by one.

 Load: input preset point number and press Load button, the dome will switch to the preset point

automatically. If there is no preset point, the dome will remain still.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Keine Kommentare

Prosonic DVR Technical Information Seite 42