Prosonic DVR Bedienungsanleitung PDF herunterladen (Seite 9)

E. Set up the DDNS for the router if necessary:

z if the ADSL or Cable modem that router connects has static fixed IP service from

ISP, then you can remote access the DVR by IE – http://218.167.4.26:80 (take

page 6 as example), where 218.167.4.26 is the internet IP, and 80 is the HTTP

port(Step C), where is default not necessarily shown

z If the ADSL or Cable modem that router connects has only dynamic IP service (it

is mostly), you have to apply DDNS for this router, following is an example:

Different routers have different DDNS service, most popular is

www.DynDNS.org

, you may visit it and apply a DDNS Domian name before

doing this, after that you would get a domain name with username/password

for this router DDNS setup.

After the DDNS router setup, you can remote access the DVR by http://Domain Name:

HTTP port(Step C), where HTTP port is not necessary if it is 80.

18. How can I set up more than one H.264 DVRs in the same network (intranet)?

It is same as FAQ 17 for one DVR setup, besides you have to set up different Control Port,

Data Port, HTTP Port for these DVRs(FAQ 17 Step C), and make different port forwarding for

your router(FAQ 17 Step D), and DDNS set up if necessary(FAQ 17 Step E).

When remote access these DVRs, you have to use different HTTP port to access them

accordingly..

19. What is the port no. I should input for Control Port, Data Port and HTTP port?

There are 0 ~ 65535 for service ports, you may surf

http://www.iana.org/assignments/port-numbers

for more information, it is better to use our

default setting(80, 67, 68) except you connect more than two DVRs under the same network

as FAQ 18. We suggest using unassigned port no. over 1023 if you have to.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Prosonic DVR Bedienungsanleitung Seite 9